battery online

Mindray LI12I001A Battery, Mindray LI13I001A Battery, Mindray LI23I001A Battery, Mindray LI23S001A Battery, Mindray LI23S002A Battery, Mindray LI24I001A Battery, Mindray LI24I002A Battery, Mindray LI34I001A Battery, Mindray BeneHeart D3 Battery, Mindray BeneHeart D6 Battery

Fluke OptiFiber SM OTDR Module

Fluke OptiFiber SM OTDR Module

Welcome to a Biomedical Battery specialist of the Fluke Battery

This Singlemode OTDR + PM Module is intended for use with Fluke'sOptiFiber series. The modules with battery such as Anritsu MT9081 Battery, Anritsu S331E Battery, Acterna MT9090 Battery, EXFO AXS-100 Battery, EXFO XW-EX003 Battery, Tektronix TPS2000B Battery, Tektronix TPS2024B Battery, , Mindray PM9000 Battery, Fluke 43 Battery, Fluke BP7235 Battery, Fluke 744 Calibrator Battery, Fluke DSP-4000PL Battery measure the insertion loss of singlemode fiberlink using a separate far-end 1310/1550 nm source. The OptiFiber SM OTDR + PM +Loss/Length Module certifies a SM link usinig the proven standards-based twofiber, dual wavelength DTX Fiber Module methodology.

Certify it. Diagnose it. Document it. With the first certifying OTDR designedfor network owners and installers.

The use of fiber in premise networks is continually growing - and so are therequirements for testing and certifying it. To ensure the performance of thesemission-critical LANs, network owners are demanding more information that givesthem a complete picture of the fiber plant. And no solution provides a morecomplete picture than the OptiFiber Certifying OTDR.

OptiFiber is the first tool specifically designed to keep network owners andinstallers on top of the latest requirements for testing and certifying fibernetworks. OptiFiber integrates insertion loss and fiber length measurement,OTDR analysis and fiber connector endface imaging to provide a higher tier offiber certification and diagnostics. The companion LinkWare� PC softwaredocuments, reports and manages all test data. OptiFiber enables network ownersof all experience levels to certify fiber to industry and customerspecifications, troubleshoot short-haul connection-rich links and thoroughlydocument their results.

At a Glance
- Troubleshoot and certify fiber with Auto OTDR analysis.
- Document fiber with LinkWare management and reporting software.
- Enhance visibility with event deadzones as short as 1 meter.
- Boost productivity with an easy-to-use design.
- Modular design supports multimode and singlemode testing.
- New Smart Remote options for loss/length certification.

HP Code Master Defibrillator

HP Code Master Defibrillator

Welcome to a Biomedical Battery specialist of the HP Battery

As a significant entity of this domain, we provide patrons with the superior quality of HP Code Master Defibrillator with battery like Hp HP43120A Battery, Hp M1722A Battery, Hp M1723A Battery, Hp M1758A Battery, Hp M1770A Battery, Hp M1771 Battery, Hp M1772A Battery, Hp M2460A Battery, Philips Pagewriter 100 Battery, Philips Pagewriter 200 Battery, Philips Pagewriter 300 Battery, GE DASH 1000 Battery. Equipped with built-in recorder, ECG and Pacing, HP code master defibrillator is fabricated by using modern machinery and technology. In addition to this, HP code master defibrillator is equipped with AC power with battery back-up.

Features:

•Rechargeable and sealed lead-acid battery
•2.5 hours monitoring or 50 full-energy discharges
•AC input: 100 to 230 VAC +/- 15%

Specifications :

• Dimensions
•7.9"H x 11.8"W x 15.6"L, 20cm x 30cm x 39.7cm
• Weight 24 lbs. / 10.9kg

Battery :

•Type: Rechargeable, sealed lead-acid battery. 4 Ah, 12 V nominal.
•Charge Time: 2 hours to 90% of full capacity. 18 hours to 100% capacity. Repeated charging to less than 100% will reduce the useful life of the battery.
•Capacity: 2.5 hours monitoring or 50 full-energy discharges or 1 hour monitoring and recording.
•AC input: 100 to 230 VAC +/- 15%, 50/60 Hz.
•Battery Indicators: Illuminated LED indicates battery is charging. Low Battery message appears on the monitor.

Synchronizer :

•SYNC message appears on the monitor and is annotated periodically on the recorder while in synchronous mode. An audible beep sounds with each detected R-wave; while a marker on the monitor and sync mark on the recorder strip indicate the discharge point.
• Paddles: standard paddles are anterior / anterior. Adult electrodes (83 cm sq) slide off to expose pediatric electrodes (21 cm sq). Paddle cord is 10 feet (3m). Full range of internal paddles are available.

Monitor :

• Input: ECG activity may be viewed through the paddles or patient cable.
• Lead fault: LEADS OFF message and dashed baseline appear on the monitor if a lead Becomes disconnected. Common mode rejection: greater than 100dB measured as per AAMI standards for cardiac monitors.
• Heart rate display: digital read out on monitor from 20 to 280 bpm.

Fluke 1750 Power Quality Recorder

Fluke 1750 Power Quality Recorder

Welcome to a Biomedical Battery specialist of the Fluke Battery

Record three-phase power quality and monitor for power quality disturbances with the new Fluke 1750 Power Recorder and the Fluke Power Analyze software. These power meters with battery like Fluke Ti20-RBP Battery, Fluke Ti20 Battery, Fluke 125S Battery, Fluke BP120 Battery, Fluke BP123S Battery, Fluke BP120MH Battery, Fluke 43B Battery, Fluke BP130 Battery, Fluke BP190 Battery, Fluke BP-190 Battery, Rohde Schwarz FSH626 Battery, Rohde Schwarz FSH6 Battery automatically record every power quality parameter and event, on every cycle - all the time.

Long-term analysis: Uncover hard-to-find or intermittent issues; monitor critical equipment, capturing power quality events to correlate with equipment malfunction
Power quality surveys: Quantify power quality throughout a facility, documenting results with professional reports
Quality of service compliance: Validate incoming power quality at the service entrance
Equipment Installation/Commissioning: Benchmark: power system prior to install to insure quality of service

Features:
•Power quality that meets the standard: All measurements comply with IEC61000-4-30 standards for correct evaluation of all measured valuesincluding voltage, current, power, harmonics, flicker etc.
•Quick and reliable configuration: PDAwireless “front panel interface” provides a window into what theinstrument is recording, enabling quick and reliable configuration even inawkward test locations
•Threshold-free set up: Apply thresholdsafter data is collected with Fluke Power Analyze Software - no need toworry about missed information due to incorrect setups
•Captures everything: Cross-channel andcurrent triggering capture every measurement, on every channel, every time
•Intuitive PC software: Easily analyzedata and generate reports with automated EN50160 reporting and compliance
•Plug and play: Set up in minutes withself-identifying current probes and single-lead voltage connections
•No need to reconnect wires: Swap channelsinternally with the wireless PDA or PC when connections are not correct
•Measure every parameter: Voltage andcurrent on three phases, neutral, and ground
•5 MHz, 8000 Vpk waveform capture: Get adetailed picture of even the shortest events
•Quickly retrieve data: With included SDmemory card or via the 100BaseT high-speed Ethernet connection

Philips PM2813 Power Supply

Philips PM2813 Power Supply

Welcome to a Biomedical Battery specialist of the Philips Battery

The Fluke/Phillips PM2813 is a triple output power supply with battery such as Philips RESPIRATEUR V60 Battery, Philips RESPIRATEUR V60S Battery, Philips Dameca Siesta i Breasy Battery, 20*H-AA2000B Battery, Philips Suresign V24E Battery, Philips HeartStart FR2 Battery, Philips M3863A Battery, Philips M3861A Battery, Philips M3860A Battery, Philips M3840A Battery, Philips HeartStart FR2 Plus Battery, Philips M3841A Battery.

The Phillips PM2813 is a triple output power supply.The Fluke line of Programmable Power Supplies was created with automated testing in mind. The GPIB/IEEE-488 interface, output power module and output metering facilities are built in, taking up only two engineering units of rack height. The full rack-width models come equipped with rack mount ears for easy installation in a standard 19-inch rack.

The front panel allows full access to all instrument functions, including voltage and current readback.
A sequence of front panel settings can be created with the AUTOSTEP mode, quickly creating an automated test pattern of user-defined voltages and currents with no need for a controller.
The optional front panel output gives the user easy access to both the power output connections and the sense lines; great for prototyping and temporary setups.

Zoll R Series Plus Defibrillator

Zoll R Series Plus Defibrillator

Welcome to a Biomedical Battery specialist of the Zoll Battery

The Zoll R Series Plus Defibrillator with battery like Zoll M Battery, Zoll PD1400 Battery, Zoll PD2000 Battery, Zoll PD1600 Battery, Zoll PD1700 Battery, Zoll PD4410 Battery, Rohde Schwarz HA-Z203 Battery, Rohde Schwarz HA-Z204 Battery, Rohde Schwarz HA-Z206 Battery, Rohde Schwarz PR100 Battery, Rohde Schwarz FSH4 Battery, Rohde Schwarz FSH8 Battery combines the simplicity of the BLS R Series Defibrillator and can transform into an ALS Defibrillator for advanced life support.

Real CPR Help and See-Thru CPR technology allow the rescuer to see depth and rate of compression as well as monitor underlying ECG rhythm while performing CPR. See-Thru CPR reduces the duration of pauses during CPR so rescuers are able to see whether an organized underlying rhythm has developed without stopping compressions. Real CPR Help guides rescuers with text and audio feedback on CPR quality measures with numeric data based on real time depth and rate of compressions.

The R Series Plus Defibrillator also features Rectilinear Biphasic Waveform (RBW) that was designed for external defibrillation to control for variations in patient impedance through a series of digitally-controlled internal resistors. This feature provides the maximum average current held for the optimum duration. RBW provides more current than the typical "high energy" biphasic that other defibrillators use, and has proven to be more effective than monophasic waveforms, especially on high-impedance patients.

The R Series works with the Zoll OneStep Pacing system. With OneStep Pacing and Zoll OneStep electrodes, the need for a separate ECG cable is eliminated. The ECG electrodes are incorporated with an anterior OneStep electrode. The electrodes are triangular and incorporate a circular multi-function therapy electrode in the middle and three ECG electrodes at the ends of the triangular electrode pad shape. While the therapy portion emits a pacing pulse, the ECG electrodes acquire signals from the heart and function as the monitoring element. Electrodes for this function are sold separately from the Defibrillator Unit.

Zoll R Series Plus Defibrillator Features:
•Real CPR Help.
•See-Thru CPR filter and compression index.
•OneStep Electrode Technology.
•ECG 3-lead cable with AHA markings.
•OneStep system with CPR cable.
•Code readiness testing system that self-tests over 100 parameters.
•Flexibility to transform from BLS to ALS.
•Integrated AC power (120 VAC / 60 Hz).
•Built-in test, compact flash, and USB port.
•WiFi (802.11) compatible (*requires modem).
• Shipping Weight: 22 lbs.
• Shipping Dimensions: 18" x 15" x 12.

Sumitomo Q102-CA Fusion Splicer

Sumitomo Q102-CA Fusion Splicer

Welcome to a Biomedical Battery specialist of the Sumitomo Battery

Sumitomo Electric Lightwave introduces the Q102-CA Core Alignment Fusion Splicer to its Quantum splicer portfolio with battery such as Sumitomo BU-11 Battery, Sumitomo TYPE-81C Battery, Sumitomo T-600C Battery, Sumitomo TYPE-Z1C Battery, Nellcor N-550 Battery, Nellcor N560 Battery, Nellcor N550B Battery, Philips M3046A Battery, Philips M3046A Battery, Philips M2 Battery, Philips M3 Battery, Philips M4 Battery. Maintaining all of the industry-leading features of the previous Q101, the new fusion splicer continues to raise the bar in performance and reliability. 5 second splice and 9 second heating times coupled with Sumitomo’s patented dual independent ovens improve efficiency by over 80% for perfectly streamlined and consecutive splices.

The Q102-CA’s completely redesigned user interface provides a “smartphone-like” experience for inspecting minute areas of fiber with a simple drag and zoom. The new fusion splicer also features a new rugged frame withstanding twice the shock as the previous generation.

Sumitomo Quantum Type-Q102-CA-3 Core Alignment Fusion Splicer Side View

Quantum Type-Q102-CA Features
•Dual Independent Heat Shrink Ovens
•Fastest Splicer with 5 sec. Splice time and Dual 9 Sec. Heaters
•WVGA High Resolution, Fully Navigational Touch Screen Monitor
•SD Port for Virtually Unlimited Data Storage
•Internet Interface for Remote Maintenance & Software Upgrades
•Smartphone-Like User Interface
•Wide Angle LED Work Area Illumination
•Ruggedized Design for Shock, Water, and Dust Resistance
•Automatic Splice Start, Arc Calibration, Heater Start and Fiber Identification
•Long Life Battery for 300 Splice and Heater Cycles per Charge
•Long Life Electrodes up to 6,000 arcs
•Lynx2 CustomFit® Splice-On Connector Compatibility
•Three Year Warranty Included
•24-Hour Technical Support via 1-888-SPLICER